Denison Premier Series P200 Hydraulic Pump Parker P200 Piston Pumps

Denison Premier P200 pump (Parker P200 hydraulic pump) for underground mining equipment. 200 cc/rev, 414-500 bar continuous, 7250 psi intermittent, 2100-2700 rpm. 12-month warranty + free parts + remote video support.

Brand: Parker

Series family: Parker Denison

Product type: Hydraulic pump

Model/series: P200

Source category: Premier Series Pump

Product Parameters

Denison Premier Series P200 Hydraulic Pump Parker P200 Piston Pumps SERIES : Premier Series Pump Denison Premier Series P200 Hydraulic Pump Parker P200 Piston Pumps

Product Details

Parker Denison Premier P200 Hydraulic Pump: The Workhorse for Underground Mining Equipment In the world of underground mining, hydraulic reliability isn’t a luxury—it’s a matter of safety and production. From load-haul-dump (LHD) vehicles to roof bolters and conveyor drives, mining equipment demands pumps that deliver massive flow at extreme pressures while surviving dust, water, and explosive gases. The Denison Premier P200 pump —also known as the Parker P200 hydraulic pump —meets these demands with a 200 cm³/rev displacement, continuous pressure up to 500 bar (7250 psi intermittent), and a flexible 2100–2700 rpm speed range. This is the pump that keeps mines moving. Technical Specifications – Denison Premier P200 Parameter Value Model P200 Max. Displacement 200 cm³/rev Continuous Pressure 414 – 500 bar Intermittent Pressure 6000 – 7250 psi Speed Range @ Full Stroke 2100 – 2700 rpm Circuit Type Open circuit Warranty 12 months Technical PDF www.baolilai-pump.com/contact_us/ Why the P200 is the Backbone of Mine Hydraulics Massive Flow for Heavy-Duty Functions The P200’s 200 cc/rev displacement moves over 500 L/min at 2700 rpm. This makes it ideal for: LHD steering & braking: Instant response in narrow drifts. Roof support pumps: Simultaneous leg extension on longwall faces. Conveyor drives: Sustained torque for continuous material movement. 500 Bar – No Pressure Drop Under Load When an LHD loads a 10-ton bucket or a roof bolter tensions resin anchors, pressure spikes are inevitable. The P200’s gold cup rotating group—with floating valve plate and hardened piston shoes—absorbs 7250 psi shocks without internal leakage. Continuous 500 bar rating means full power hour after hour. Explosion-Proof & Contamination-Tough Underground coal and potash mines contain methane or combustible dust. The P200 is built with spark-resistant internals and sealed housings, meeting ATEX/MSHA standards. Double shaft seals keep abrasive rock dust, water, and mud out—critical for equipment operating in wet, dirty conditions. Thermal Stability Across Extremes Operates from –30°C to 115°C. Reliable starts in frozen drifts and cool running in deep, hot stopes. Key Mining Applications for the P200 Equipment Type Role of P200 Benefit Sandvik LHDs Steering, braking, fan drive Explosion-proof, 500 bar continuous Atlas Copco / Epiroc jumbos Feed & rotation circuits Handles 7250 psi spikes from percussive drilling Longwall roof supports Leg extension & retraction High flow for simultaneous cylinder operation Underground conveyors Drive motor supply Sustained torque, contamination resistant Official manufacturer resources: What You Get – Baolilai Support 12-month warranty – covers cylinder block, valve plate, pistons, seals, bearings. Free replacement parts – within warranty, we ship failed components at no cost (local labor not included). Remote video support – factory engineers guide installation, troubleshooting, and repair via video call. Explosion-proof design – safe for hazardous underground environments. Extreme environment toughness – field-proven in mines worldwide. FAQ – Denison Premier P200 Pump Q1: How does the P200 compare to the P16 or P140 Premier pumps? The P200 has 200 cc/rev displacement—larger than the P140 (140.9 cc) but smaller than the P16 (262.2 cc). It’s ideal for applications requiring higher flow than the P140 but a more compact package than t

Additional technical details are available on request.