Denison Premier P16 Hydraulic Pump Parker P16 High Pressure Performance Piston Pumps

Parker Denison P16 hydraulic pump (P16H, P16Q) for mobile and crawler cranes, drilling rigs, and mining equipment. 262.2 cc/rev, 414-500 bar continuous, 7250 psi intermittent, 1850-2100 rpm. 12-month warranty + free parts + remote video support.

Brand: Parker

Series family: Parker Denison

Product type: Hydraulic pump

Model/series: Premier

Source category: Premier Series Pump

Product Parameters

Denison Premier P16 Hydraulic Pump Parker P16 High Pressure Performance Piston Pumps SERIES : Premier Series Pump Denison Premier P16 Hydraulic Pump Parker P16 High Pressure Performance Piston Pumps

Product Details

Denison Premier P16 Hydraulic Pump: High-Displacement Power for Heavy-Lift Cranes Mobile cranes face some of the most punishing hydraulic demands in heavy industry: lifting multi-ton loads, extending telescopic booms under pressure, and slewing heavy assemblies—all while maintaining precise control on uneven terrain. The Denison P16 hydraulic pump from Parker is engineered to meet these challenges head-on. Available as P16H and P16Q variants, this pump combines a substantial displacement of 262.2 cm³/rev with continuous operating pressures of up to 500 bar, making it the hydraulic muscle that crane operators rely on for heavy lifting and material handling. 📐 Technical Specifications – Denison Premier P16 Pump Parameter P16H / P16Q Max. Displacement 262.2 cm³/rev Continuous Pressure 414 – 500 bar Intermittent Pressure 6000 – 7250 psi Speed Range @ Full Stroke 1850 – 2100 rpm Circuit Type Open circuit Warranty 12 months Support Remote video engineering; free parts within warranty Technical PDF www.baolilai-pump.com/contact_us/ Note: P16H optimized for high‑torque (1850–2000 rpm), P16Q for higher speed (2000–2100 rpm) 🏗️ Why Cranes Need the P16’s Massive Displacement Powering Telescopic Boom Extension A crawler crane’s multi-section telescopic boom requires enormous hydraulic flow to extend heavy steel sections under load. The P16’s 262.2 cc/rev displacement delivers approximately 500–550 L/min at full speed—sufficient to raise and extend booms up to 100 meters. The P16Q variant is specifically tuned for faster boom cycle times, while the P16H provides higher torque for handling maximum-rated lifts. Handling Winch and Hoist Circuits Hydraulic winch drives demand sustained pressure and smooth speed control. The P16 Premier maintains consistent flow at 500 bar even during long hoisting cycles, preventing the pressure drop that can cause load drift or inefficient operation. This is critical for cranes lifting heavy structural steel or precast concrete panels. Slew and Swing Control Large cranes require precise rotation control to position loads accurately. The P16’s pressure compensator responds quickly to command changes, delivering smooth, predictable slewing motion—essential for work in tight construction sites where load placement must be millimeter-perfect. 🛡️ Built for Extreme Crane Environments High-Pressure Resilience The gold cup rotating group design—featuring a floating valve plate and hardened piston shoes—absorbs the sharp pressure spikes that occur when a crane’s load suddenly shifts or when the boom encounters unexpected resistance. The 500 bar continuous rating ensures no loss of lifting capacity under sustained heavy loads. Explosion-Proof & Contamination Defense The P16 meets ATEX and MSHA standards, making it safe for crane operations in hazardous environments such as chemical plants, refineries, and underground mining. Double shaft seals and optional case drain flushing keep abrasive dust, moisture, and contaminants out—critical for cranes working in dusty construction zones or coastal salt-spray environments. Thermal Stability Operates reliably from –30°C to 115°C, ensuring cold-weather starts in winter and stable performance under the intense heat of continuous summer operation. 🚜 Beyond Cranes: The P16 Across Heavy Industry The same qualities that make

Additional technical details are available on request.